Carolina Fish Talk Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter · #1 · (Edited)
I set up a new system and working on it for about a month and I am very interested in any advise you guys may have to improve or make my system better. Please see pic below to see my system

Thank you guys for your help in advance,
 

·
Registered
Joined
·
1,085 Posts
Only thing I see is a kink in your chiller intake tube. When the tubing folds that extremely you will drastically reduce the flow volume therefore straining the pump on the chiller. I've gotten away from polyethylene and switched to the pvc reinforced tubing as it doesn't fold quite so easily.
 

·
Registered
Joined
·
1,085 Posts
Sorry, meant to put this in the last post. If you don't want to replace the tubing, you can run a spring or larger tube outside the smaller tube to reinforce it so it does not kink as easily.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top